Setup Guides | Dash Cams, GPS Trackers & Smart Gadgets
How to Set Up & Use Smart Tech from Gadget Aliens
Jump to Setup:
360° Auto Face Tracking Gimbal
- Charge the gimbal using the included USB cable.
- Mount your smartphone in the clamp & balance it evenly.
- Power it on and press the "Track" button to activate face detection.
- Start recording for hands-free vlogging or live streaming.
Watch Setup Video
USB C Hub 5-in-1 Setup
- Plug the hub’s USB-C connector into your laptop or device.
- Connect your peripherals: HDMI cable, USB devices, SD card reader, etc.
- No driver installation needed—plug-and-play functionality.
GSM GPS Tracker Setup
- Insert an activated GSM SIM card (no PIN required).
- Charge the tracker fully and power it on.
- Use SMS commands or the tracking platform for real-time updates.
- Place the tracker discreetly in a vehicle or bag.
Wireless CarPlay Converter Setup
- Plug the device into your car’s USB CarPlay port.
- Activate Bluetooth on your phone and pair.
- The device auto-connects on subsequent drives.
RF Bug Detector & Hidden Camera Finder Setup
- Turn on the device and adjust the sensitivity knob.
- Sweep around the area slowly, focusing on electronics and corners.
- Listen for beeps or watch the LED for spikes indicating detection.
Dual Dash Cam Rearview Mirror Setup
- Mount the front camera on the windshield or rearview mirror.
- Install the rear camera near the license plate or rear window.
- Connect to your vehicle’s 12V outlet or use a hardwire kit.
- Check both feeds on the display before you hit the road.
Solar Anti-Theft LED Warning Light Setup
- Clean the surface where the light will be attached.
- Peel off the adhesive backing and firmly stick the device.
- Position the solar panel to face the light source.
- The light powers up automatically and starts blinking.
Plug-and-Play GPS Tracker Setup
- Insert the SIM card into the tracker.
- Power on the device—no app download required.
- Track the device via SMS commands or your mobile browser.
- Secure the tracker using the built-in magnet or vehicle plug.
Wall Listening Device Setup
- Charge the device fully using the provided USB cable.
- Plug in the included headphones.
- Place the device against a wall, door, or window.
- Adjust the sensitivity dial to capture faint sounds.
Forged Carbon Tracker Card Holder Setup
- Activate the tracker via the linked mobile app or AirTag system.
- Slide the ultra-slim card into your wallet or bag compartment.
- Use the app to ping your tracker if you misplace it.
Need more support? Visit our FAQ page or email support@gadgetaliens.com.